PUMA evoSPEED 1.3 FG static analytical and practical evaluation 2

Shoes front end thicker: 2.10 mm
Central thinner: 1.265 mm
Vamp is very thin, conform to the requirements of the speed boots has always been


1.3 tongue briefly

The tongue of evoSPEED 1.3 FG used the hollow out design of large area, and shape than before evoSPEED 1 and 1.2 has a larger change, central tongue lengthen, convenient to wear.

Tongue of the structure is simplified, two layers of PU material, simple and practical, tactility more directly.

The thickness of the tongue only 0.97 mm, as thin as cicada.

Shoe warehouse at the back of the simple and practical, imitation leather material friction is good, very stable, lined with soft, will not interfere with the action.

Positions within the front still have reinforced material, protect your feet less vulnerable in actual combat.

1.5 insole briefly

EvoSPEED 1.3 FG insole surface is very concise, yellow part is on the back of cushioning function material

The shape of the insole keep consistent characteristics of the speed PUMA boots, the ball wide, slightly thin in the middle

Heel and the ball position has cushioning design, structure with evoSPEED1 and 1.2 simplified somewhat, but still have a large effective area, the key position also has to protect.

The ball position, the insole thickness: 4.36 mm.
Insole thickness uniform distribution, slow shock resistance is good too.But before the yellow shock area after the actual combat will be squeezed, don't know if this generation of products have changed.